Smooth Classic Black Nickel LED Dimmer
Click on finish to see the full range
Black |
White |
Polished Chrome |
Satin Chrome |
Polished Brass |
Satin Brass |
Antique Brass |
Satin Nickel |
Black Nickel |
Prices
*Free delivery on orders over £95What is a LED Dimmer?
Our LED Dimmers are specifically designed to operate on ALL types of DIMMABLE LED lamps and strips. These LED dimmers can be easily programmed to optimise LED performance by following the instructions provided with this product. The dimmers have a choice of modes to match your LEDs and the minimum brightness can changed to suit your room. Important - non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur. Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattages and are very energy efficient. This can cause problems when choosing the correct dimmer. If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required. Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed. Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable. Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur. On special request we can make up combined dimmers that incorporate LED dimmers and Intelligent dimmers on the same plate if required. We recommend 25mm deep wall boxes for mounting our LED dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges. |
Customer reviews for Smooth Classic Black Nickel LED Dimmer
No reviews for the Smooth Classic Black Nickel LED Dimmer yet - Be the first to review it.
Other reviews for the Smooth Classic Switches & Sockets range are
Average customer rating: 5 stars - 4 reviews
Good Combination
29 March 2021 by Andy, Carlisle - Verified Customer
Never knew you could get these combinations. Now have ceiling lights on dimmer and side lights on switch. Super.
Completed House
21 March 2021 by Will L, Beeston - Verified Customer
Used this screwless smooth style everywhere in the house now. Look a lot nicer than switches and sockets with screws showing. Very happy.
Great Idea
04 March 2021 by Zoe P, London - Verified Customer
Solved our problem with lights on the stairs.
Smooth
20 February 2021 by Kate G, Kings Lynn - Verified Customer
Really like the front of the light switch with no screws, gives a much better look. The satin sheen matches the other bits in the kitchen perfectly.