Grande White PIR Switch
Click on finish to see the full range
 White |
 Polished Chrome |
 Polished Brass |
 Satin Brass |
 Antique Brass |
 Satin Stainless |
Please click on an image to enlarge.
Prices
*Free delivery on orders over £95What is a PIR Switch?
| Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range. PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time. Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement. They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load. They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials. You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral. Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED). They will also switch on/off Fans to the maximum load of 250w. We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches. |
Customer reviews for Grande White PIR Switch
No reviews for the Grande White PIR Switch yet - Be the first to review it.
Other reviews for the Grande Switches & Sockets range are
Average customer rating: 
5 stars - 6
reviews
11 April 2021 by Donna M, Linlithgow - Verified Customer
Good Design
01 April 2021 by Terry, Belfast - Verified Customer
Good design to put both tv aerial and satellite connector on one piece. Electrician installed it no problem. All plugged in for tv and Sky.
Good Idea
22 March 2021 by Jess P, Truro - Verified Customer
We wanted to have a dimmer and light switch on the same switch but didn't like the normal switch with a dimmer. This looks so much better, just have to remember which is which.
Usb Sockets
21 March 2021 by Emma K, Bradford - Verified Customer
Absolutely happy with these sockets. Definitely would recommend to others.
So Useful
15 March 2021 by Eric C, Peterborough - Verified Customer
Glad we found these, if only they did wireless charging sockets!
Lovely Sockets
12 March 2021 by Julian P, Exeter - Verified Customer
Life saver. Not constantly looking for chargers now. They have a nice finish that doesn't show fingermarks too.
