Trim Antique Brass PIR Switch
Click on finish to see the full range
 Polished Chrome |
 Satin Chrome |
 Polished Brass |
 Antique Brass |
 Satin Nickel |
 Old Bronze |
Please click on an image to enlarge.
Prices
*Free delivery on orders over £95What is a PIR Switch?
| Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range. PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time. Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement. They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load. They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials. You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral. Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED). They will also switch on/off Fans to the maximum load of 250w. We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches. |
Customer reviews for Trim Antique Brass PIR Switch
No reviews for the Trim Antique Brass PIR Switch yet - Be the first to review it.
Other reviews for the Trim Switches & Sockets range are
Average customer rating: 
5 stars - 8
reviews
Used On Stairs
06 April 2021 by Nicola, Leicester - Verified Customer
Works great.
As Described
27 March 2021 by Steve, Falmouth - Verified Customer
Works! It is what it is.
Good Solution
19 March 2021 by Dominic W, Brighton - Verified Customer
Good solution to mixing lights. Makes installation easier too. Electrican happy
For The Bathroom
15 March 2021 by Anita S, Banbury - Verified Customer
Fed up with plastic switch on landing. This looks much much better.
Very Good Item
09 March 2021 by Lee S, Romford - Verified Customer
Very pleased with light switch dimmer
Great Colour
27 February 2021 by Brian P, London - Verified Customer
The bronze is perfect for the stairs. We are very happy as hard to find a matching colour intermediate switch.
Very Useful
24 February 2021 by Ben D, Solihull - Verified Customer
We mad eour own sky and network socket for the bedroom with this system. Neat finish.
Square Corners!!
11 February 2021 by Richard L, Edinburgh - Verified Customer
Been looking for square corners for ages in a similar finish. So glad to find them. Many thanks
