Slim Polished Chrome PIR Switch
Click on finish to see the full range
 Polished Chrome |
 Satin Chrome |
 Polished Brass |
 Satin Brass |
 Antique Brass |
 Satin Stainless |
 Dark Pewter |
Prices
*Free delivery on orders over £95What is a PIR Switch?
| Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range. PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time. Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement. They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load. They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials. You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral. Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED). They will also switch on/off Fans to the maximum load of 250w. We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches. |
Customer reviews for Slim Polished Chrome PIR Switch
No reviews for the Slim Polished Chrome PIR Switch yet - Be the first to review it.
Other reviews for the Slim Switches & Sockets range are
Average customer rating: 
5 stars - 7
reviews
Replaced An Old Plastic Socket That Cracked
05 April 2021 by George, Leeds - Verified Customer
Good Idea
03 April 2021 by Alan, Kingston - Verified Customer
Added Cat6 between downstairs and upstairs for better connection. Works fine.
Good Looking
31 March 2021 by John, Brighton - Verified Customer
Looks the part and much more expensive than the price paid. Like how the switches work.
Prefer Flat To Wall Bump
29 March 2021 by Holly, Somerset - Verified Customer
I prefer flat switches and was very happy to find this as colour suits room while still flat.
Tidies Things Up
16 March 2021 by Graham G, Watford - Verified Customer
Had the sky cable coming out of the wall and plaster was getting damaged. Used this plate to put the cable through and tidy up the wall.
Beautiful
12 March 2021 by Ayesha D, London - Verified Customer
Beautiful and elegant really worth the price
Ideal
11 February 2021 by Brian J, Suffolk - Verified Customer
Bought just this for water heater and fits in nicely
